Carp Catchers Blog

Customer Martin Deathridge scored on his first night at his new syndicate. Martins mirror weighed 24lb 4oz and the successfull bait was Sticky Baits Bloodworm Boilies with the same company’s Bloodworm Dumbells as a hookbait. A Combi-Rig tied blowback style with Korda IQ and Korda Supernatural  to a size 8 ESP Curve Shanx Hook helped to trip up the wary mirror.

Best Fishes,

John

A couple of new bits from Atomic Tackle this time. The Atomic Stiffun  is a stiff coated comb-link hooklink material. It has a transluscent, matt finish stiff outer coating and a dual colour camouflage inner braid which will blend in with most lakebeds. I have tried this myself, when steamed it really does go stiff!!! For more information or to purchase please click on the above link. The Atomic Bombz Away Lead Clip is a new lead system that does not rely on a moulded arm to hold the lead. The metal clip which secures the lead is independent of the lead clip body and runs along a track inside the main body. The Bombz Away Lead Clip allows you to drop the lead if the fish becomes snagged but eliminates the problem of the lead sometimes jettisoning on the cast. For more information or to purchase please click on the above link.

Best Fishes,

John

Triggalink is a revolutionary hooklink braid. It is woven with PVA which once in water it melts drawing in the braid and becomes an elasticated, self hooking rig. Carp do not know how to deal with Triggalink due to the elasticity which makes it hard for them to use the weight of the lead to throw the hook. The elasticity in the braid doesn’t allow them to make contact with the lead without the hook penetrating and taking hold. Triggalink is proven to enhance hook holds, especially when fishing barbless hooks and in weed.

To tie this rig I used Nash Triggalink, Nash The Missing Link, a Nash Safety Bolt Bead Ring Swivel and a Nash Fang Gaper Hook.

Step 1.

Strip 8 inches of Missing Link and tie a small hair loop in one end.

Step 2.

Now thread your choosen bait onto the hair with a baiting needle and secure it in place with a bait stop. 

Step 3.

Pass the other end of the missing link through the back of the eye and set a gap of about 6mm between the top of the hook and the bait.

Step 4.

Whip the missing link up the shank of the hook 5-6 times…..

….Before passing the tag end through the back of the eye again.

Step 5.

Now cut 12 inches of Triggalink off the spool and hold it along side the tag end of the missing link with your hook and bait attached to.

Step 6.

While continuing to hold the two along side each other create a loop with the triggalink.

Step 7.

Take the shorter end of the Triggalink and pass it round the Missing link and through the loop created 4 times.

Step 8.

Now create a loop with the Missing link along side the Triggalink.

Step 9.

Pass the tag end of the Missing link around the Triggalink and through the loop 4 times.

Step 10.

Now moisten both knots and tighten them down gently before butting them up together. Then trim the tag ends and blob them with a lighter.

Step 11.

Pass the tag end of the Triggalink through the ring on the ring swivel.

Step 12.

Create a loop with the tag end alongside the length of Triggalink tied to the Missing link.

Step 13.

Pass the tag end around the Trigga link and through the loop 5 times.

Step 14.

Moisten the knot and tighten gently, then trim the tag end.

The rig is now complete.

The length of the Triggalink when the rig is complete measures approximately 6 1/2 inches.

Once wet the PVA in the Triggalink melts and contracts the braid. Shortening it to approximately 5 1/2 inches.

This is worth baring in mind when tying a rig with Triggalink as it will always end up shorter once wet. This rig is known as a Combi-Link Rig and can be used with either bottom or pop up hookbaits. If you wish to use a pop up, mould some tungsten putty, such as Kryston Heavy Metal Plus , around the knot in the two hooklinks.

Tight Lines

Dave

The Claw rig is a very effective bottom bait rig. With no shrink tube or rigs rings its also very simple to tie.

For the purpose of this demonstration I used the Korda Hybrid Stiff Coated Braid, a Korda Kurv Shank  Hook and a 3mm length of the Korda Silicone Tubing.

Step 1.

Remove roughly 4 inches of coating from the Korda Hybrid stiff hooklink and tie a small overhand loop in the stripped end.

Step 2.

Now thread a 3mm section of Silicone tubing onto the hooklink.

Step 3.

Then pass the hook point through the silicone tubing towards the loop tied in step 1. Make sure not the snag the hookpoint in the braid on the way through as this could damage the hooklink.

Step 4.

Thread the hooklink through the back of the eye and then thread your choosen hookbait onto the hair and secure it with a bait stop. Set the hair with about a 1cm gap between the hookbait and hook.

Step 5.

Now whip the hooklink up the shank of the hook 6 times before passing it through the back of the eye to create a knotless knot. 

Step 6.

Next thread two of the small Korda Sinkers onto the hooklink. It is easier the strip a small amount of coating off the end of hooklink as the coating makes it too thick to get the sinkers on.

Step 7.

Tie a figure of eight knot in the end of the hooklink.

Double over the end of the hooklink and create a loop like so….

Then pass the end of the doubled over loop through the loop just created….

And again….

Moisten the knot and pull it tight.

Step 8.

Position the Korda Sinkers evenly apart along the hooklink and gently steam it straight over a kettle.

The rig is now ready to be attached to your lead setup and cast out.

Due to the stiffness and nature of this rig it is best fished over firm/hard lakes beds.

Tight Lines

Dave

After deciding to change waters for the coming winter and due to busy banks I’ve had a little bit of a confidence boost. On my first weekend session from late friday evening to early monday morning I had a bit of a result in the shape of 6 mirror and common carp to 21lb15oz. After turning up in the dark at 8.30 friday evening I opted for the north bank as I had been told it was free of any other anglers. After watching the water for nearly 2 hours I decided to fish up the dam end in the the deeper water or what was left of it anyway as this is where I’d seen the carp showing the most . The reservoir serves the purpose of topping up the Grand Union canal so the water levels can get quite low at times.

During my session I banked 6 carp to 21lb 15oz from 3 different spots using  Baitcraft T1  boilies over a spread of bait which included a spod mix of hemp, Solar Pure Bait BYT and crushed T1s over one of my rods. Most of the bites came during the hours of darkness which meant I had to have all my spots marked up to get them back on the spots in the darkness.

The rigs I used consisted of 15lb Korda IQ2 tied to 2 inches of stripped Sufix Stiff Silt with a size 6 Korda Wide Gape Hook, a small piece of shrink tubing over the eye and tied blowback style.

Tight Lines

Dave

(I should have turned my head torch off for the night time shots, but had forgotten while sorting the self takes. Luckily they didn’t turn out too bad.)

Im a big fan of spreading boilies over a larger area to encourage carp to keep moving, especially as the temperature is beginning to drop. Its helps your rigs work more effectively as the carp aren’t stopping to feed, they are picking up the boilies on the move. It also leaves less chance of the fish sussing your baited area. Tightly baited spots do produce fish and I will also use them in given situations but I believe that a spread of bait is far less obvious as the carp only come across the odd boilie over your area. It can also help produce takes faster as the carp are more likely to pick up your bait if they come across it.

This is a nice clean mirror carp caught over a spread of 20mm Baitcraft T1 Freezer Boilies on a recent overnighter where I put all three rods in the same area and spread 150 baits over the three of them. The rig I used a blowback combi rig tied with 15lb  Korda IQ Fluorocarbon   and 2” of stripped Sufix Stiff Silt  to a size 6 Korda Wide Gape Hook .

Give it a go.

Tight lines

Dave

Gary and I fished the 2009 BCAC Qualifier at Farlows lake again this year. We got down on the Thursday and had a good look round, then had a nice social in the bar that evening. The next morning we were up at first light and after a cup of tea we scouted the lake again. We had a hearty breakfast in the onsite cafe and then the moment of truth the draw!! Gary and I were fortunate and came out second and got our second choice of swim. We were up against some stiff opposition, The O’Connors, Ian Russell, as well as last years winners, but we felt confident. Things started slowly in our swim but after spodding out 3 kilos of 18mm  Mainline Cell Freezer Boilies  I had a run at 9.30pm on a rod fished to an island gap. I managed to get the carp away from the snag, but half way in it kited to my left towards a gap in the islands. The carp had to be stopped so I held on and gave no line and unfortunately the hook pulled argggh!! Gary had a take that night and was cut off almost immediately. Next morning we found another snaggy spot and had a fish within an hour which weighed 18lb and some ounces.

Finally we were off the mark with a nice common carp. The take came to a combi link rig tied with Rigmaroles  Hydro-Link Silt  with two pieces of  Enterprise Pop-Up Sweetcorn  as a hookbait. In the afternoon we tried zig rigs on top of the gravel bars to no avail. We spodded out about another 6 kilos of bait for the coming night. We added some sweetcorn and  Carp Company Icelandic Red Cranberry & Caviar Freezer Boilies  to the spod mix.  At about 5.00pm I had another bite on the island rod which was cut off after about 20 seconds. Another cut off on the same rod about two hours later had Gary and I pulling our hair out. We both tied on the heaviest Nylon leaders we could (leadcore and braid leaders are banned) in an effort to combat the cut offs. Gary had one cut off and landed one carp that night which weighed 19lb plus so now we were in the running. Next morning saw us land another 18lb pluser, which put us well into contention. It was not to be though and at 12.00 the hooter sounded to end another BCAC qualifier. Had we landed any one of the fish we lost we would have qualified.

Best Fishes,

John