Carp Catchers Blog

We now have the Sticky Baits Bloodworm Range in stock now and it has been doing really well for some of our customers. The Sticky Baits Bloodworm Boilies  contain both low temperature and soluble fishmeals, plenty of fresh bloodworm, blood plasma as well as a specially imported. To raise the attractor profile Robin Red and Paprika are also included at the optimal level. We have the bloodworm boilies in both Freezer and shelf life. To compliment the boilies we have the Sticky Baits Bloodworm Pop Ups and Sticky Baits Bloodworm Dumbells. For those of you that use sticks the Bloodworm Bag & Stick Mix contains much higher levels of the soluble ingredients than can be used in the boilies themselves resulting in really high levels of attraction around your hookbait. To increase that attraction even further soak your hookbaits in the Bloodworm Bait Glug which contains a potent fish protein extract, Paprika oleoresin and not forgetting hydrolised bloodworm. The Bloodworm Bait Glug is really thick and Sticky!  If you are using the dumbells or boilie bottom baits, the Bloodworm Paste, which also contains higher levels of the soluble ingredients than the boilies, will boost your hookbaits attraction even further. It could also be a great stalking hookbait in its own right. Finally we have the Sticky Baits Bloodworm Pellets which are one of the best selling specialist pellet of all time. The bloodworm content has been increased and the Hydrolysed Bloodworm Compound has now been added making this pellet even more potent. For more information or to purchase please click on any of the above links.

Best Fishes,

John

This is a simple surface rig that will compliment the Korda Surface Controllers or any other surface set up.

To tie this rig you will need some Korda Cruiser Control Surface Line, Korda Mixa Hooks, some Enterprise Imitation Dog Biscuits and a Korda Size 11 Ring Swivel.

Step 1.

Remove about 3-4 foot of Korda Kruiser Control Surface Line and tie a small loop knot in one end.

Step 2.

Now thread on an Enterprise Imitation Dog Biscuit. Place one of the supplied shot in the hair loop and pinch in place, then pull it tightly into the recess in the biscuit.

Step 3.

Pass the other end of the line through the back of the eye of the Korda Mixa hook and position it below the bait. Then hook the imitation mixer on the side opposite the shot.

Step 4.

Whip the line up the shank of the hook 6 times making sure the first whip goes away from the join in the eye.

Step 5.

Now whip the line once back down the shank of the hook.

Step 6.

Pass the line through the back of the eye again and moisten before tightening down gently.

Step 7.

Now slide the hook round further so the shank is inside the imitation dog biscuit with the point of the hook free to get a hook hold.

Step 8.

Tie the other end of the hooklink to a size 11 ring swivel using a palomar knot. Double over the end of the hooklink and pass it though the big eye of the swivel.

Step 9.

Now form an overhand knot in the doubled over section of the hooklink around the swivel.

Step 10.

Pass the swivel through the loop in the end of the hooklink which was made when the overhand knot was formed.

Step 11.

Moisten the knot and tighten it down gently before trimming the tag end.

The rig is now ready to be attached to your surface setup and cast out.

Give it a go.

Tight Lines

Dave

Two new innovative products from Nash Tackle now. The Nash Box Logic Tackle Station is the ultimate terminal tackle storage solution.The Tackle Station features adjustable, spring loaded legs, to convert to a full bivvy table and tackle storage station. With infinitely variable internal partitoning you can configure the sections how you want them. This is a well thought out piece of kit. For more information or to purchase please click on the above link.

The next item is the  Nash Box Logic Bivvy Box Table  which was designed with the mobile angler in mind. The underside has a compartment to accommodate our Box Logic Medium Tackle Box (optional accessory not included). There is also a drawer with variable partitioning. Both the drawer and the tackle box fit on top of the bivvy table, converting it to a rig tying station. For more information or to purchase please click on the above link.

                                              Nash Tackle Station

                                        Nash Bivvy Box Table

Best Fishes,

John

After struggling to catch from his new syndicate customer Rob O’Brien is now on fire!! He caught his first UK 30 and a common at that. This stunning common carp weighed 30lb 2oz and was caught from a pre-baited hole in the weed at 80yrds range. The winning rig was tied KD style with 25lb Atomic Jel-E-Wyre  tied to a size 8 Korda Kurv Shank Hooks  . Rob also used the new Korda Safe Zone Kamo Leader Hybrid Lead Clip to drop the lead on the take. Well done Rob stunning fish!!

Best Fishes,

John

A couple of interesting new products now. The  Carp Porter MK5  is Prestige’s best barrow ever! Carp Catchers has the Monster Wheel model which will ride easily over those humps, bumps and stumps. The wheel folds or detaches for easy storage. Spikes on the legs provide stabilty and the handles have an adjustable height facility. For more information or to purchase please click on the above link.

The Solar Adjustable Snag Bar  are superbly engineered in stainless steel. They are adjustable in height and the ears can even be totally removed. Both male and female chains can be attached. These are a really nifty bit of kit , for more information or to purchase please click on the above link.

                                           Carp Porter MK5

                                                    Solar Snag Bar

Best Fishes,

John

After a very long lean spell customer Sean Bowen has landed a nice common from the difficult Pit 6. It’s not the biggest carp in the world, but they all count and when your struggling size doesn’t matter. Sean broke his blank spell using Baitcraft T1 Freezer Boilies  his rig featured a Korda Soft Coated Braid hooklink tied to a size 8  Korda Kurv Shank Hooks . Well done Sean on, keeping on.

Best Fishes,

John

The quantity of bait you choose to prebait with should be determined by the stocking density of your water. If you are fishing a heavily stocked lake then prebaiting with a small amount of bait my not prove to be very productive.

Boilies

If you are fishing a well stocked lake then I would suggest around 2-3 kgs of boilies three times a week, larger boilies are generally better to prebait with as it avoids the attention of other species such as Bream and Tench. A single fish is capable of eating a very large amount of bait in one sitting, although this will vary throughout the year depending on water temperatures. Carp are cold blooded animals so their dietary requirements are much lower in cold water conditions. In the winter it is possible to reduce your prebait to around 1kg because of this, it will only take a few mouthfuls for a carp to fill itself up and move away from the area. On lakes that hold a smaller stock of carp I would maybe reduce the quantity of bait by a kilo or so unless you know that the fish will accept large quantities of bait without shying off them from past angling pressure. Try to use a good quality freezer boilie such as Mainline Cell , Nash Scopex Squid  or Richworth XLR8 .

Particles and Pellets

If you choose to bait with particles and pellets on a well stocked lake I would up the amount as particles are cheaper and they will recieve a lot more attention from nuisance species. Maybe 10-15 kg per week baited every other night. If you are using tiger nuts to bait up with then please be aware that they are not very digestable to carp and are best used in small quantities. The same goes with what I said above about water temperatures and food consumption so alter your quantities accordingly. It is also worth baring in mind that smaller fish are more able to eat the particles and pellets you are baiting with, so increasing the quantities where large numbers of nuisance species are present maybe required for the carp to get a look in. Otherwise the carp maybe seeing none of your bait and are unaware of the area you are trying to create.

The quantities mentioned above are all just guidelines, each lake, stock and situation is different so go with what you think is best but bare in mind the factors I have mentioned. See also Part One - Part Two

Tight Lines

Dave

Some more new products now. From Nash Baits we have the new Nash IC-1 Boilies  now in stock these have a curry/spicy flavour and are suitable for year round use. We have them in both freezer and shelf life and I’m sure they’ll be really popular. From Gardner Tackle we have the new Gardner Covert Chod Hook which is plated rather than Teflon coated. We all know the problems with Teflon coated hooks, rust around the eyes, loss of hook point sharpness and increased diameter, well the unique Covert plating overcomes these problems and also increases camouflaging. For more information or to purchase please click on the above links.

                                        Nash IC-1 Boilies

                                       Gardner Covert Chod Hook

Best Fishes,

John

The Korda Interceptor is a new distance surface controller. The design of the controller allows you to change the weight of the controller without having to break down your setup. The controller has a self orientating high viz sight, is very aerodynamic for long range casting with minimal tangles and is made with a low visibility surface colour plastic.

To setup one up you will need a Korda Interceptor and a Korda size 11 ring swivel.

Step 1.

Thread your mainline through the rigid tube.

Step 2.

Slide the soft insert onto your mainline and push the rigid tube inside it.

Step 3.

Now tie on the size 11 ring swivel using a Palomar knot. Double over the end of your mainline and pass it through the eye of the swivel.

Step 4.

Tie and overhand knot around the swivel with the doubled over section of your mainline.

Step 5.

Then pass the swivel through the loop created in the doubled over mainline once the overhand knot has been formed.

Step 6.

Moisten the knot and tighten it down slowly, before trimming the tag end.

Step 7.

Gently pull the swivel into the soft insert.

Step 8.

Locate the slot on the side of the interceptor body and place your mainline in the slot.

Step 9.

Slide the interceptor down the rigid tube until is sits firmly on the soft insert.

The Interceptor is now ready for you to attach your hooklink and cast out.

Give it a go. To purchase any of the items shown please click on the above links.

Dave

After ten months on his new syndicate customer Rob O’Brien finally caught a carp and what a carp a new personal best!! Rob’s common was caught at first light and weighed 27lb 4oz. The successful rig was tied KD style with Atomic Jel-E-Wyre  to a size 8 Korda Kurv Shank  hook with 2.5oz square lead on a Korda Safe Zone Safety Lead Clip. It was cast to a clear spot in sunken dead weed at 80 yards range with a scattering of 30 boilies around it. Rob is family man with very little fishing time, so well done Rob on your new PB.

Best Fishes,

John