Carp Catchers Blog

In this Carp Catchers Blog we have one for the future. Customer Rob O’Brien sent in this photo of this gorgeous scaly mirror carp not a monster but who cares. Also notice how Rob has chosen a suitable background for his catch photo which really enhances the whole thing. Rig details are sketchy but a Korda Choddy  hook and a Korda IQ Hooklink  were involved.

Best Fishes,

John

After deciding to change waters for the coming winter and due to busy banks I’ve had a little bit of a confidence boost. On my first weekend session from late friday evening to early monday morning I had a bit of a result in the shape of 6 mirror and common carp to 21lb15oz. After turning up in the dark at 8.30 friday evening I opted for the north bank as I had been told it was free of any other anglers. After watching the water for nearly 2 hours I decided to fish up the dam end in the the deeper water or what was left of it anyway as this is where I’d seen the carp showing the most . The reservoir serves the purpose of topping up the Grand Union canal so the water levels can get quite low at times.

During my session I banked 6 carp to 21lb 15oz from 3 different spots using  Baitcraft T1  boilies over a spread of bait which included a spod mix of hemp, Solar Pure Bait BYT and crushed T1s over one of my rods. Most of the bites came during the hours of darkness which meant I had to have all my spots marked up to get them back on the spots in the darkness.

The rigs I used consisted of 15lb Korda IQ2 tied to 2 inches of stripped Sufix Stiff Silt with a size 6 Korda Wide Gape Hook, a small piece of shrink tubing over the eye and tied blowback style.

Tight Lines

Dave

(I should have turned my head torch off for the night time shots, but had forgotten while sorting the self takes. Luckily they didn’t turn out too bad.)

Shop regular John Jones banked a 3o plus common on a new water recently. The fished weighed in at 35lb 2oz and was a fish caught a month earlier by Ian Smith at a similar weight. John tempted the fish back to the bank with a mixed bed of sticky baits boilies and a snowman hookbait. The set up John used was a Korda 4oz lead on a  Korda Safe Zone Safety Lead Clip  and Johns’ rig was tied with Kryston Super Mantis Green Hooklink and a size 6 Nash Fang X Hook. Well done again mate. Nice photo too.

Tight Lines

Dave

Have you noticed how many 30lb plus common carp are being reported to the Carp Catchers Blog? Anyhow customer Martin Deathridge fished an overnight session on Bluebell Lakes Swan lake recently and was rewarded with the 32lb 4oz common shown below. Using a new bait on test, Martin fished over light weed at 60 yards range. The rig Martin used consisted of a 12” Korda Supernatural Sinking Braid   hooklink tied to a size 6 ESP Stiff Rigger  hook. Martins hookbait was a snowman with a 10mm Hi-Viz Mainline Pop-Ups  topper. Nice result for an overnighter Martin.

Best Fishes,

John

Customer Ian Smith caught one of his target fish recently. Fishing a new water, Ian caught the magnificent common carp shown below after only a few nights. The common weighed 35lb 5oz, a little bit down on it’s normal weight. This is no doubt due to the good spawning weather we had a month or so back. Ian fished a light scattering of mixed sized Nash Scopex Squid Liver Plus Robin Red Shelf Life Boilies  to a silty area in open water. The rig Ian used was a 10”  Kryston Super Mantis hooklink tied to a size 6 Gardner Mugga  hook. The hookbait was a Nash Scopex Squid Liver Plus Robin Red  pop up fished an inch off the deck. This guy just keeps catching, well done Ian.

Best Fishes,

John

This Carp Catchers Blog is going to show how to tie the 5 Turn Twice Through The Eye Clinch Knot. The Clinch Knot is an improvement on the blood knot. It was devised by carp fishing pioneer Jim Gibbinson and is a real belt and braces knot. The 5 turn clinch knot is normally used to attach swivels but there is no reason it could not be used to attach hooks. Ok carp catchers lets get started.

Step 1

Thread your line through the swivel

Step 2

Thread it through again

Step 3

Pull the tag end through about 6” from the swivel and lay alongside the mainline or hooklink

Step 4

Whip the tag up over the mainline or hooklink back towards the swivel as per photo. Do this 5 times

Step 5

Tread the tag end through the loop created at the swivel end

Step 6

Thread the tag end through the loop created at the opposite end to the swivel

Step 7

Moisten and carefully bed down the knot. Cut off tag end

                                                                                      5 Turn Clinch Knot

Best fishes,

John

Carp are very wary creatures when put under angling pressure and they soon wise up and learn the tricks to avoid capture. One of which involves identifying anglers lines and avoiding the areas which they have identified as dangerous. There are a variety of methods anglers have at their disposal to try and eliminate these issues. These include back leads both flying and clip-on, tungsten putty to pin leaders and hooklinks down and now Korda have released their Sinkers. The Sinkers contain tungsten and are designed to pin down hooklinks.

Backleads have been around for years and have been used to good effect by many anglers in deceiving wary carp. The principle of a backlead is that they are attached to your line to pin it down to the bottom.

Clip-on back leads have been used for years and were first used with stones and paper clips. Nowadays there are many available on the market such as  Korda Intelligent Backleads (See picture below). The idea behind clip-on back leads is that once you’ve cast out you slacken off your line and clip on a small weight. Once clipped on you slide the backlead down your line into the margin. This pins it down out of the way of any passing fish, thus concealing the line from their ever wary nature. These also work well in preventing tangles when playing fish under the rod tip as they hold your other lines out of the way. The disadvantage of backleads is they can create unnatural line angles. These unatural line angles reduce indication of bites and can at times cause your line to sit awkwardly, especially in the presence of weed.

Flying back leads such as  Korda Safe Zone Flying Back Leads (See Picture Below) are attached to your line prior to casting out. They are shaped so that they fly back up your line towards the rod on the cast using air resistance. Flying back leads sit closer to your terminal tackle and pin your leader down more effectively than clip-ons. Unfortunately lying back leads also have a few disadvantages as they are affected by side winds, casting technique and also cause awkward line angles if used incorrectly.

Tungsten putty is reasonably new to the carp world but has been used to good effect since its appearance. It can be moulded on hooklinks and leaders to pin them to the lake bed. You can also rub tungsten putty up and down braided mainline or hooklinks further enhancing your presentation. Tungsten putty is incredibly heavy for the quantity you need and it works really well at pinning everything down to the bottom out of the way of wary carp. There are many brands on the market with a range of colours available including  Gardner Critical Mass Putty . (See Picture Below)

The newest product available to modern day carp anglers are the  Korda Sinkers which are tungsten hooklink weights. Korda Sinkers are easily threaded onto your hooklinks to keep them pinned to the lake bed. Sinkers are easy to attach, grip the line incredibly well and are fish friendly. (See Picture Below)

All these products will work to your advantage in the right situations. Give careful consideration to when and where to use them, as if used incorrectly they could hinder your chances of catching. Think about the make up of the lake bed, depth variations, weed growth and decide whether they will work to your advantage. Take these factors into account and you might find, one or a combination of a few of these products will help you put more fish on the bank. Give them a go and Pin It Down.

Tight Lines

Dave

The D-rig has many uses in carp fishing but the D-rig tied in this demonstration is best suited to a bottom bait, my chosen bait for this rig is a bunch of maggots tied onto the rig ring with bait floss.

The components used in the demonstration is the Korda IQ Xtra Soft Flourocarbon Hooklink with a Korda size 8 Wide Gape and a Korda Rig Ring.

Step 1.

Start by cutting a 10 inch length of the IQ hooklink, then attach the hook with a knotless knot leaving an inch above the hook. (See picture below)

Step 2.

Now slide a rig ring onto the IQ above the hook. (See picture below)

Step 3.

Then thread the IQ through the back of the eye to from a small D with the rig ring running on it, trim the excess and blob the end with a lighter being careful not burn yourself or the hooklink below the hook. (See pictures below)

Step 4.

Pull the rig ring gently so the blobbed end sits against the eye, it should look like this.

Step 5.

Now tie a figure of eight loop in the other end of the IQ and trim the tag end. (See picture below)

The finished rig should look like this.

Tight Lines

David