Carp Catchers Blog

Its getting to that time of year again when maggots are becoming more widely used due to them being such an effective winter bait. Have a go at tying this rig and see how you get on.

The components used in this demonstration were the Korda IQ2 Xtra Soft Fluorocarbon , Korda Wide Gape  hook size 8 and  Korda Micro Rig Swivel.

Step 1.

After cutting your required length of fluorocarbon tie on a Korda Wide Gape using a knotless knot making sure to whip round the shank twice on the way back down to the eye. 

Step 2.

Now thread a micro rig swivel onto the tag end above the hook.

Step 3.

Then pass the tag end through the back of the eye to the front and trim the tag end down to about 3-4mm. This will have created a D shape on the back of the shank for the swivel to move on.

Step 4.

Holding the hooklength out of the way slowly blob the tag end with a lighter to secure it in place. Make sure not to burn the hooklink as this will damage the fluorocarbon and increase the chance of it breaking. Also take care not to burn yourself.

Step 5.

To finish the rig tie a figure of eight knot in the other end setting the desired length of rig you require and trim the tag end.

The finished rig should look like this.

This rig works best with a large bunch of maggots and a couple of imitation pop-up maggots to help counter the weight of the hook. This rig isn’t strictly a maggot rig and can be used with other baits as well. 

The knots used in this demonstration can be found in previous blogs by using the search bar on the top right hand side of the page.

Give it a go.

Tight Lines

Dave

After deciding to change waters for the coming winter and due to busy banks I’ve had a little bit of a confidence boost. On my first weekend session from late friday evening to early monday morning I had a bit of a result in the shape of 6 mirror and common carp to 21lb15oz. After turning up in the dark at 8.30 friday evening I opted for the north bank as I had been told it was free of any other anglers. After watching the water for nearly 2 hours I decided to fish up the dam end in the the deeper water or what was left of it anyway as this is where I’d seen the carp showing the most . The reservoir serves the purpose of topping up the Grand Union canal so the water levels can get quite low at times.

During my session I banked 6 carp to 21lb 15oz from 3 different spots using  Baitcraft T1  boilies over a spread of bait which included a spod mix of hemp, Solar Pure Bait BYT and crushed T1s over one of my rods. Most of the bites came during the hours of darkness which meant I had to have all my spots marked up to get them back on the spots in the darkness.

The rigs I used consisted of 15lb Korda IQ2 tied to 2 inches of stripped Sufix Stiff Silt with a size 6 Korda Wide Gape Hook, a small piece of shrink tubing over the eye and tied blowback style.

Tight Lines

Dave

(I should have turned my head torch off for the night time shots, but had forgotten while sorting the self takes. Luckily they didn’t turn out too bad.)

Customer Tony had a nice result from Wold Lake recently. Using  Mainline Hi Visual  Pineapple pop ups Tony had two nice mirror carp of 17lb and 24lb. Tonys’ rig consisted of  Korda IQ Xtra Soft  tied to a size 8  Korda Kurv Shank  hook. Well done Tony!!

Best Fishes,

John