Posts Tagged ‘Korda Kurv Shank Hooks’

At Last!!!!!

Friday, May 28th, 2010

After a very long lean spell customer Sean Bowen has landed a nice common from the difficult Pit 6. It’s not the biggest carp in the world, but they all count and when your struggling size doesn’t matter. Sean broke his blank spell using Baitcraft T1 Freezer Boilies  his rig featured a Korda Soft Coated Braid hooklink tied to a size 8  Korda Kurv Shank Hooks . Well done Sean on, keeping on.

Best Fishes,

John

[Slashdot] [Digg] [Reddit] [del.icio.us] [Facebook] [Technorati] [Google] [StumbleUpon]

New PB For Rob

Thursday, May 13th, 2010

After ten months on his new syndicate customer Rob O’Brien finally caught a carp and what a carp a new personal best!! Rob’s common was caught at first light and weighed 27lb 4oz. The successful rig was tied KD style with Atomic Jel-E-Wyre  to a size 8 Korda Kurv Shank  hook with 2.5oz square lead on a Korda Safe Zone Safety Lead Clip. It was cast to a clear spot in sunken dead weed at 80 yards range with a scattering of 30 boilies around it. Rob is family man with very little fishing time, so well done Rob on your new PB.

Best Fishes,

John

[Slashdot] [Digg] [Reddit] [del.icio.us] [Facebook] [Technorati] [Google] [StumbleUpon]

The Shot On The Hair Rig

Tuesday, February 23rd, 2010

The Shot On The Hair Rig is basically a bottom bait rig with a small shot added to the hair to allow a pop-up hookbait to be used. This completely alters how the rig to reacts to how it would with a bottom bait. The hookbait is allowed to move more naturally due to it’s bouyancy and the length of the hair. The shot on the hair allows you to either critically balance or overweight the pop up hookbait.  The nature of supple braid allows the hookbait to be picked up with minimal resistance and the pattern of the hook means the point hangs low below the hookbait helping it to grab hold. The simplicity of The Shot On The Hair Rig makes it easy to tie and it minimises the bulky components such as shrink tubing used on some rigs.

For the purpose of this demonstration I used the Korda Supernatural Hooklink, a Korda Kurv Shank Hook and a No.4 split shot. The shot size is determined by the size and bouyancy of your choosen pop-up, the bigger and more bouyant the pop-up the larger the shot. I found a No.4 shot to work perfectly with a 14mm Richworth Pineapple Hawaiian Pop Ups  although it varies between different makes and types of pop-ups.

Step 1.

Cut 14″ of Korda Supernatural from the spool and tie a small overhand loop knot in one end.

 

Step 2.

Thread on your choosen pop-up and secure in place with a bait stop.

Step 3.

For this version of the rig pinch the shot onto the hooklink below the pop-up. This will give you a slow sinking hookbait which is almost critically balanced. We will show you an alternative version of this rig, which has  the shot positioned differently, soon.

Step 4.

Thread the Korda Kurv Shank Hook onto the hooklink passing the braid though the back of the eye to the front and position the bait about 6mm from the top of the hook.

Step 5.

Now whip the hooklink up the shank of the hook 6-7 times and then pass the hooklink through the back of the eye to the front to finish the knot.

Step 6.

Double over the other end of the hooklink.

Step 7.

Then form a loop with the doubled over section of the hooklink.

Step 8.

Now pass the end of the doubled over section around the bottom and through the back of the loop created in step 7.

This creates the figure of eight, if you get this eight shape then you have done it right.

If you struggle with tying the knot then try this method. Alternative Figure of Eight Loop Knot.

Step 9.

Now gently tighten down the knot and trim the tag end.

The rig is now complete and ready to be attached to your lead setup.

The rig is best fished of with a small Dynamite Stick or PVA Mesh Bag thread down the hooklink over the hook to avoid tangles.

Tight Lines

Dave

[Slashdot] [Digg] [Reddit] [del.icio.us] [Facebook] [Technorati] [Google] [StumbleUpon]

How To – Claw Rig

Thursday, February 18th, 2010

The Claw rig is a very effective bottom bait rig. With no shrink tube or rigs rings its also very simple to tie.

For the purpose of this demonstration I used the Korda Hybrid Stiff Coated Braid, a Korda Kurv Shank  Hook and a 3mm length of the Korda Silicone Tubing.

Step 1.

Remove roughly 4 inches of coating from the Korda Hybrid stiff hooklink and tie a small overhand loop in the stripped end.

Step 2.

Now thread a 3mm section of Silicone tubing onto the hooklink.

Step 3.

Then pass the hook point through the silicone tubing towards the loop tied in step 1. Make sure not the snag the hookpoint in the braid on the way through as this could damage the hooklink.

Step 4.

Thread the hooklink through the back of the eye and then thread your choosen hookbait onto the hair and secure it with a bait stop. Set the hair with about a 1cm gap between the hookbait and hook.

Step 5.

Now whip the hooklink up the shank of the hook 6 times before passing it through the back of the eye to create a knotless knot. 

Step 6.

Next thread two of the small Korda Sinkers onto the hooklink. It is easier the strip a small amount of coating off the end of hooklink as the coating makes it too thick to get the sinkers on.

Step 7.

Tie a figure of eight knot in the end of the hooklink.

Double over the end of the hooklink and create a loop like so….

Then pass the end of the doubled over loop through the loop just created….

And again….

Moisten the knot and pull it tight.

Step 8.

Position the Korda Sinkers evenly apart along the hooklink and gently steam it straight over a kettle.

The rig is now ready to be attached to your lead setup and cast out.

Due to the stiffness and nature of this rig it is best fished over firm/hard lakes beds.

Tight Lines

Dave

[Slashdot] [Digg] [Reddit] [del.icio.us] [Facebook] [Technorati] [Google] [StumbleUpon]

Double Up For Tony

Friday, October 9th, 2009

Customer Tony had a nice result from Wold Lake recently. Using  Mainline Hi Visual  Pineapple pop ups Tony had two nice mirror carp of 17lb and 24lb. Tonys’ rig consisted of  Korda IQ Xtra Soft  tied to a size 8  Korda Kurv Shank  hook. Well done Tony!!

tony17lbsept09

tony24lbsept09

Best Fishes,

John

[Slashdot] [Digg] [Reddit] [del.icio.us] [Facebook] [Technorati] [Google] [StumbleUpon]

New PB For Sean

Sunday, May 3rd, 2009

Regular customer Sean upped his personal best recently with this 24lb 8oz beauty of a common carp. To make his catch even more meritable Seans’ common was caught from a fairly tough water, Pit 6 on the A1 Pits complex. Sean fish was caught on a single Carp Company Pukka Pop Up  Hi Viz Squid flavour fished on its’ own at a 110yrds. The rig used was tied with ESP Striptease   knotless knotted to a size 8 Korda Kurv Shank Hook . A well deserved capture, nice one Sean.

sean09march24lb9oz

Best fishes,

John

[Slashdot] [Digg] [Reddit] [del.icio.us] [Facebook] [Technorati] [Google] [StumbleUpon]