To tie this rig you will need some Korda Cruiser Control Surface Line, Korda Mixa Hooks, some Enterprise Imitation Dog Biscuits and a Korda Size 11 Ring Swivel.

Step 1.

Remove about 3-4 foot of Korda Kruiser Control Surface Line and tie a small loop knot in one end.

Step 2.

Now thread on an Enterprise Imitation Dog Biscuit. Place one of the supplied shot in the hair loop and pinch in place, then pull it tightly into the recess in the biscuit.

Step 3.

Pass the other end of the line through the back of the eye of the Korda Mixa hook and position it below the bait. Then hook the imitation mixer on the side opposite the shot.

Step 4.

Whip the line up the shank of the hook 6 times making sure the first whip goes away from the join in the eye.

Step 5.

Now whip the line once back down the shank of the hook.

Step 6.

Pass the line through the back of the eye again and moisten before tightening down gently.

Step 7.

Now slide the hook round further so the shank is inside the imitation dog biscuit with the point of the hook free to get a hook hold.

Step 8.

Tie the other end of the hooklink to a size 11 ring swivel using a palomar knot. Double over the end of the hooklink and pass it though the big eye of the swivel.

Step 9.

Now form an overhand knot in the doubled over section of the hooklink around the swivel.

Step 10.

Pass the swivel through the loop in the end of the hooklink which was made when the overhand knot was formed.

Step 11.

Moisten the knot and tighten it down gently before trimming the tag end.

The rig is now ready to be attached to your surface setup and cast out.

Give it a go.

Tight Lines

Dave

The Korda Kruiser Controller  is a totally unique design. The innovative line attachment makes it virtually tangle free. The Kruiser Controller needs no lead or extra weight resulting in quiet water entry. It is the same low visibilty green as the Interceptor. For more information or to purchase please click on the above link.

The Korda Mixa Hooks  are the first hook specially designed for surface fishing. They have a silky smooth PTFE coating preventing reflective glint, which could spook wary fish. The Mixa Hook is flat forged for extra strength and has a super short shank for added lightness. They are available in both barbed and barbless patterns. For more information or to purchase please follow the above link.

Finally we have the  Korda Kruiser Control Floater Line   has again been specifically designed for surface fishing. It is super soft and supple to ensure easy casting of even the lightest controller. Kruiser Control has a low gloss finish and near neutral buoyancy ensuring that it lies unobtrusively in the surface film. It has limited stretch minimising hookpulls. For more information or to purchase please click on the above link.

                                                                                         Korda Interceptor Controller

                                                                                              Korda Kruiser Controller

                                                                                               Korda Mixa Hook

Best fishes,

John